Chevrolet Trax: Interior Trim and Paneling
Chevrolet Trax (2013-2022) Workshop Manual / Accessories & Equipment / Interior Trim and Paneling
- Interior Trim and Paneling - Repair instructions
- Sunshade replacement (encore)
- Windshield garnish molding replacement (encore)
- Body lock pillar upper trim panel replacement
- Luggage shade replacement (encore)
READ NEXT:
Interior Trim and Paneling - Repair instructions
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
REPAIR INSTRUCTIONS
REAR SIDE DOOR ACCESSORY SWITCH MOUNT PLATE REPLACEMENT (ENCORE)
Fig. 1: Rear Side Door Acc
Front side door armrest switch mount plate replacement (driver side door,
encore)
Fig. 3: Front Side Door Armrest Switch Mount Plate - Driver Side Door
Front Side Door Armrest Switch Mount Plate Replacement (Driver Side Door,
Encore)
FRONT SIDE DOOR ARMREST SWITCH MOUNT PLATE
Rear side door window garnish molding replacement (encore)
Fig. 9: Rear Side Door Window Garnish Molding
Rear Side Door Window Garnish Molding Replacement (Encore)
REAR SIDE DOOR WINDOW GARNISH MOLDING REPLACEMENT (TRAX)
Fig. 10: Rear Side Door Window G
SEE MORE:
Engine oil and oil filter replacement
Removal Procedure
Open hood.
Place a drain pan below the vehicle.
CAUTION: To prevent damage to oil filter cap ensure proper tool is
used. Do not
use an open end wrench which may cause damage to filter cap.
Using a 24mm socket or closed end wrench loosen oil filter cap. Unscrew
filter cap 3
Engine support fixture
Fig. 237: Engine Support Fixture Components
Engine Support Fixture
ENGINE MOUNT BRACKET REMOVAL
Fig. 238: Engine Mount Bracket And Bolts
Remove the 3 engine mount bracket bolts (1).
Remove the engine mount bracket (2).
CAMSHAFT TIMING CHAIN INSPECTION
Special Tools
EN-952 Fixing Pin
E
© 2019-2025 Copyright www.chevtrax.com
