Chevrolet Trax: Heater and air conditioning control replacement (C60)
.gif)
Fig. 6: Heater and Air Conditioning Control
Heater and Air Conditioning Control Replacement (C60)
.jpg)
.jpg)
HEATER AND AIR CONDITIONING REMOTE CONTROL REPLACEMENT (C67)
.gif)
Fig. 7: Heater And Air Conditioning Remote Control
Heater and Air Conditioning Remote Control Replacement (C67)
.jpg)
.jpg)
TEMPERATURE CONTROL CABLE REPLACEMENT (C60)
.gif)
Fig. 8: Temperature Control Cable
Temperature Control Cable Replacement (C60)
.jpg)
.jpg)
MODE CONTROL CABLE REPLACEMENT (C60)
.gif)
Fig. 9: Mode Control Cable
Mode Control Cable Replacement (C60)
.jpg)
.jpg)
AIR INLET VALVE ACTUATOR REPLACEMENT - LEFT SIDE
.gif)
Fig. 10: Air Inlet Valve Actuator - Left Side (With CJ2)
Air Inlet Valve Actuator Replacement - Left Side
.jpg)
.jpg)
MODE CONTROL CAM REPLACEMENT (C67)
.gif)
Fig. 11: Mode Control Cam
Mode Control Cam Replacement (C67)
.jpg)
.jpg)
MODE CONTROL CAM REPLACEMENT (C60)
.gif)
Fig. 12: Mode Control Cam
Mode Control Cam Replacement (C60)
.jpg)
.jpg)
READ NEXT:
Alignment Procedure
NOTE: The HVAC module must be removed to accurately set the mode
cam gear
timing. Failure to do so may result in poor HVAC performance, and
damage to the HVAC module.
Remove the
MANUAL HVAC DESCRIPTION AND OPERATION
The air temperature and the air delivery description and operation are
divided into five areas:
HVAC Control Components
Air Speed
Air Delivery
Heating and A
SEE MORE:
AUDIO AMPLIFIER PROGRAMMING AND SETUP
Replace and Program Control Module or Reprogram Control Module
This control module does not require SPS programming or any setup procedures.
BODY CONTROL MODULE PROGRAMMING AND SETUP
NOTE:
DO NOT program a control module unless directed to by a service
proce
WARNING: Refer to Brake Fluid Irritant Warning .
CAUTION: Refer to Brake Fluid Effects on Paint and Electrical
Components Caution .
CAUTION: Only use products that comply with GM specifications and check
manufacturer information respectively. We recommend the use of GM
genuine products. Instruction