Chevrolet Trax: Bolted Exterior Body Panels and Closures - Diagnostic information and procedures
Chevrolet Trax (2013-2022) Workshop Manual / Accessories & Equipment / Bolted Exterior Body Panels and Closures / Bolted Exterior Body Panels and Closures - Diagnostic information and
procedures
READ NEXT:
DTC B3006: Hood ajar circuit
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
SCHEMATIC WIRING DIAGRAMS
HOOD LATCH WIRING SCHEMATICS (ENCORE)
Hood Latch
Fig. 1: Hood Latch
HOOD LATCH WIRING
Symptoms - bolted exterior body panels and closures
IMPORTANT: The following steps must be completed before using the
symptom tables.
Perform the Diagnostic System Check - Vehicle before using the symptom
tables in order to verify that
all of the
SEE MORE:
Vehicle access - Repair instructions
FRONT SIDE DOOR INSIDE HANDLE CABLE REPLACEMENT
Fig. 9: Rear Side Door Inside Handle Cable And Cover
Front Side Door Inside Handle Cable Replacement
REAR SIDE DOOR INSIDE HANDLE CABLE REPLACEMENT
Fig. 10: Rear Side Door Inside Handle Cable And Cover
Rear Side Door Inside Handle Cable Replaceme
Radiator replacement (LUJ, LUV)
Removal Procedure
Disconnect the battery negative cable. Refer to Battery Negative Cable
Disconnection and
Connection .
Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement
(Trax) , Front Bumper
Fascia Replacement (Encore) .
Drain the coolant fluid. Refer to Cooling Sys
© 2019-2024 Copyright www.chevtrax.com
