Chevrolet Trax: Mirror Adjustment
Exterior Mirrors
.gif)
To adjust the mirrors:
- Turn the selector switch to L
(Left) or R (Right) to choose the
driver or passenger mirror.
- Move the control to adjust the
mirror.
- Turn the selector switch to
to
deselect the mirror.
Interior Mirror
Adjustment
Adjust the rearview mirror to get a
clear view of the area behind the
vehicle.
Manual Rearview Mirror
If equipped, push the tab forward for
daytime use and pull it for nighttime
use to avoid the glare of headlamps
from behind. See Manual Rearview
Mirror
Automatic Dimming Rearview
Mirror
If equipped, automatic dimming
reduces the glare of headlamps
from behind. The dimming feature
comes on when the vehicle is
started.
See Automatic Dimming Rearview
Mirror
Steering Wheel
Adjustment

To adjust the steering wheel:
- Pull the lever down.
- Move the steering wheel up,
down, forward, and backward.
- Pull the lever up to lock the
steering wheel in place.
Do not adjust the steering wheel
while driving.
READ NEXT:
Front and Rear Dome Lamps
The front dome lamp controls are in
the overhead console
: Press to turn the lamps off,
even when a door is open.
: When the button is returned to
the middle position, th
The windshield wiper/washer lever
is located on the right side of the
steering column.
Move the lever to one of the
following positions:
HI: Use for fast wipes.
LO: Use for slow wipes.
INT: Move
If equipped with these climate
control systems, the heating,
cooling, and ventilation can be
controlled for the vehicle.
Climate Control System with Heater and Air Conditioning
Temperature Control
SEE MORE:
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT
Emissions Related DTCs
Action Taken When the DTC Sets - Type A
The control module illuminates the malfunction indicator lamp (MIL) when
the diagnostic runs and fails.
The control module records the operating conditions at the time the
diagnostic fails. The control module
stores this informat