Chevrolet Trax: Traction Control/Electronic Stability Control
If equipped, the traction control system limits wheel spin. The system is on when the vehicle is started.
If equipped, the StabiliTrak system assists with directional control of the vehicle in difficult driving conditions.
The system is on when the vehicle is started.
- To turn off traction control, press
and release
on the center
stack. 
illuminates in the
instrument cluster. - Press and release
again to
turn traction control back on. - To turn off both Traction Control
and StabiliTrak, press and hold
until
and
illuminate in the
instrument cluster. - Press
again to turn on both
systems.
See Traction Control/Electronic Stability Control
Tire Pressure Monitor
This vehicle may have a Tire Pressure Monitor System (TPMS).
The low tire pressure warning
light
alerts to a significant loss in
pressure of one of the vehicle's
tires. If the warning light comes on,
stop as soon as possible and inflate
the tires to the recommended
pressure shown on the Tire and
Loading Information label. See
Vehicle Load Limits on page 9-10.
The warning light will remain on until the tire pressure is corrected.
The low tire pressure warning light may come on in cool weather when the vehicle is first started, and then turn off as the vehicle is driven. This may be an early indicator that the tire pressures are getting low and the tires need to be inflated to the proper pressure.
The TPMS does not replace normal monthly tire maintenance. Maintain the correct tire pressures.
See Tire Pressure Monitor System
Engine Oil Life System
The engine oil life system calculates
engine oil life based on vehicle use
and displays the: 
CHANGE
message on the DIC when it is
necessary to change the engine oil
and filter.
Remember, the oil life display must be reset after each oil change. It will not reset itself.
Resetting the Oil Life System
- Press the MENU button to show Remaining Oil Life on the display. This display shows an estimate of the oil's remaining useful life. If 99% is displayed, that means that 99% of the current oil life remains.
- To reset the engine oil life system, press the SET/CLR button while the oil life display is active. After a few seconds, there will be a single chime and the oil life will be reset to 100%.
Be careful not to reset the oil life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change.
See Engine Oil Life System
READ NEXT:
Driving for Better Fuel Economy
Driving habits can affect fuel
mileage. Here are some driving tips
to get the best fuel economy
possible.
Avoid fast starts and accelerate
smoothly.
Brake gradually and avoid
abrupt stops.
Avoid
SEE MORE:
Road test
NOTE: The Road Test Procedure should be performed only as part of
the Symptom
Diagnosis.
Perform the road test in conjunction with the symptom diagnosis. Refer to
Symptoms - Automatic
Transmission.
The following test provides a method of evaluating the condition of the
automatic transmission. Th
Air conditioning & heat
AIR CONDITIONING TROUBLE SHOOTING
WARNING: This is GENERAL information. This article is not intended
to be specific to
any unique situation or individual vehicle configuration. The purpose of
this Trouble Shooting information is to provide a list of common causes
to problem symptoms. For model-spec
