Chevrolet Trax Owners & Service Manuals

Chevrolet Trax: High-Beam On Light

This light comes on when the high-beam headlamps are in use.

See Headlamp High/Low-Beam Changer

Daytime Running Lamps (DRL) Indicator Light

If equipped, this light turns on whenever the Daytime Running Lamps are in use.

See Daytime Running Lamps (DRL)

Front Fog Lamp Light

For vehicles with front fog lamps, this light comes on when the front fog lamps are in use.

The light goes out when the front fog lamps are turned off. See Front Fog Lamps for more information.

Lamps On Reminder

This light comes on when the exterior lamps are in use. See Exterior Lamp Controls

Cruise Control Light

For vehicles with cruise control, the cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active.

The light turns off when the cruise control is turned off. See Cruise Control

Door Ajar Light

This light comes on when a door is open or not securely latched. Before driving, check that all doors are properly closed.

    READ NEXT:

     Information Displays

    Driver Information Center (DIC) If equipped, the DIC displays information about your vehicle. It also displays warning messages if a system problem is detected. See Vehicle Messages on page 5-25. All

     Vehicle Messages

    DIC messages display when the status of the vehicle has changed and action may be needed to correct the condition. Multiple messages appear one after another. Press any of the DIC buttons on the turn

     Trip Computer

    The trip computer is located in the Driver Information Center (DIC). It provides the driver with driving information such as average speed, fuel range, average fuel economy, and a timer. SET/CLR:

    SEE MORE:

     Brake pressure modulator valve bracket replacement

    Removal Procedure Remove the brake pressure modulator valve (BPMV) and bracket assembly. Refer to Brake Pressure Modulator Valve Replacement. Fig. 24: Brake Pressure Modulator Valve Bolts Remove the BPMV bolts (1). Remove the BPMV bracket. Installation Procedure Install the BPMV bracket

     DTC U18B9-U18BF: High speed can bus subnet configuration list

    Diagnostic Instructions Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. Review Strategy Based Diagnosis for an overview of the diagnostic approach. Diagnostic Procedure Instructions provides an overview of each diagnostic category. DTC Descriptor DT

    © 2019-2024 Copyright www.chevtrax.com