Chevrolet Trax: Fixed and Moveable Windows - Description and operation
Chevrolet Trax (2013-2022) Workshop Manual / Accessories & Equipment / Fixed and Moveable Windows / Fixed and Moveable Windows - Description and operation
- Full-cut method description
- Power windows description and operation
- Rear window defogger description and operation
READ NEXT:
Full-cut method description
NOTE:
If corrosion of the pinch-weld flange is present, or if sheet metal
repairs or
replacements are required, refinish the pinch-weld flange in order to
present a clean, primer-only surface.
Power windows description and operation
Power Windows System Components
The power window system consists of the following components:
Driver window switch
Passenger window switch
Left rear window switch
Right rear window switch
Window
Rear window defogger description and operation
Rear Window Defogger System Components
The rear window defogger system consists of the following components:
HVAC control module
Underhood ruse block (Contains rear defogger PCB relay)
Rear defogg
SEE MORE:
Vibration analysis - road testing (EL-38792-A ELECTRONIC VIBRATION ANALYZER)
Test Description
The numbers below refer to the step numbers on the diagnostic table.
5
Obtaining rotational speed for the components rotating at tire/wheel speed is
critical to systematically
eliminating specific vehicle component groups. These component rotational speeds
can be generated by
usin
Parking brake adjustment (disc brake)
NOTE: The park brake cable adjusting nut is a nylon lock type. Use
ONLY HAND
TOOLS whenever tightening or loosening the adjusting nut.
Apply and fully release the park brake several times. Verify that the
park brake lever releases completely.
Turn ON the ignition. Verify the red BRAKE warning
© 2019-2025 Copyright www.chevtrax.com
