Chevrolet Trax: Engine Heating and Cooling - Description and operation
Chevrolet Trax (2013-2022) Workshop Manual / Engine / Engine Heating and Cooling / Engine Heating and Cooling - Description and operation
READ NEXT:
Cooling fan description and operation (LUJ OR LUV)
The engine cooling fan system is composed of one cooling fan, a series of 5
relays, the engine control module
(ECM), and the associated wiring. The cooling fan assembly includes two
resistors. This
Cooling system description and operation
Engine Coolant Indicators
The instrument panel cluster (IPC) shows the engine temperature on the
temperature gauge. The value is
sent on the data communication line from engine control module (EC
SEE MORE:
Side object sensor programming and setup
NOTE:
DO NOT program a side object sensor - left unless directed to by a
service
procedure or a service bulletin. If the side object sensor - left is not
properly configured with the correct calibration software, the side object
sensor - left will not control all of the vehicle features prope
DTC P0633: Immobilizer key not programmed
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DT
© 2019-2024 Copyright www.chevtrax.com
