Chevrolet Trax: DTC C0561: System disabled information
Diagnostic Instructions
- Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
- Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
- Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptor
DTC C0561 77
System Disabled Information Stored Engine Speed Invalid Data
DTC C0561 78
System Disabled Information Stored Acceleration Pedal Invalid Data
DTC C0561 79
System Disabled Information Stored Transmission Gear Invalid Data
Circuit/System Description
The electronic brake control module disables the electronic stability control
when other electronic control modules set DTCs for components that effect the
operation of the traction control system.
Conditions for Running the DTC
Engine running.
Conditions for Setting the DTC
The electronic brake control module receives an invalid serial data message
from another module more than ten
times.
Action Taken When the DTC Sets
- The ABS indicator turns ON.
- The traction/stability control indicator turns ON.
- The electronic brake control module disables the ABS, the traction
control, and the electronic stability
control for the duration of the ignition cycle.
Conditions for Clearing the DTC
- The condition for the DTC is no longer present.
- The history DTC will clear after 40 consecutive fault-free ignition
cycles have occurred.
Diagnostic Aids
This DTC indicates there are no problems in the antilock brake system. The
body control module, the engine
control module, and the transmission control module should be checked for a
possible fault first.
Reference Information
Schematic Reference
Antilock Brake System Schematics (Encore), Antilock Brake System
Schematics (Trax)
Connector End View Reference
WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT CONNECTOR END VIEWS -
INDEX - ENCORE WIRING SYSTEMS AND POWER MANAGEMENT - COMPONENT
CONNECTOR END VIEWS - INDEX - (Trax)
Description and Operation
ABS Description and Operation
Electrical Information Reference
- Circuit Testing
- Connector Repairs
- Testing for Intermittent Conditions and Poor Connections
- Wiring Repairs
Scan Tool Reference
Control Module References for scan tool information
Circuit/System Verification
C0561 77 or C0561 78
- Ignition ON.
- Verify that no other DTCs are set.
If any other DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
If no other DTCs are set
- Replace the K20 Engine Control Module.
- Verify the DTC does not set while operating the vehicle under the
Conditions for Running the DTC.
If the DTC sets
Replace the K17 Electronic Brake Control Module.
If the DTC does not set
- All OK.
C0561 79
- Ignition ON.
- Verify that no other DTCs are set.
If any other DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
If no other DTCs are set
- Replace the K71 Transmission Control Module.
- Verify the DTC does not set while operating the vehicle under the
Conditions for Running the DTC.
If the DTC sets
Replace the K17 Electronic Brake Control Module.
If the DTC does not set
- All OK.
Repair Instructions
Perform the Diagnostic Repair Verification after completing the repair.
Control Module References for Control Module replacement, programming and setup.
READ NEXT:
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptors
D
DIAGNOSTIC CODE INDEX
DTC B3664: SUNROOF POSITION SELECT SWITCH
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions pr