Chevrolet Trax: Antilock Brake System
Chevrolet Trax (2013-2022) Workshop Manual / Brakes / Antilock Brake System
- Schematic wiring diagrams
- Diagnostic information and procedures
- Repair instructions
- Description and operation
READ NEXT:
Schematic wiring diagrams
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
SCHEMATIC WIRING DIAGRAMS
ANTILOCK BRAKE SYSTEM WIRING SCHEMATICS (ENCORE)
Module Power, Ground and Subsystem Ref
DTC B2745 (WITH C67/CJ2): Traction control switch
DIAGNOSTIC CODE INDEX
DTC B2745 (WITH C67/CJ2): Traction control switch
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Revie
SEE MORE:
Rear compartment floor panel replacement
Removal Procedure
WARNING: Refer to Approved Equipment for Collision Repair Warning .
WARNING: Refer to Glass and Sheet Metal Handling Warning .
Disable the SIR system. Refer to SIR Disabling and Enabling .
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and
Drive Range, Fourth Gear - Gen 2/Hybrid
Fig. 13: Drive Range, Fourth Gear -- Gen 2/Hybrid Fluid Flow Diagram
Drive Range - Fourth Gear Default (Gen 2/Hybrid)
If the transmission encounters an electrical component malfunction, the
transmission will default to Fourth gear.
All solenoids will default to their normal state. If the torque
© 2019-2025 Copyright www.chevtrax.com
