Chevrolet Trax: Diagnostic information and procedures
Chevrolet Trax (2013-2022) Workshop Manual / Transmission / Manual Transmission - M20 M32 (MR5) / Diagnostic information and procedures
- DTC P0502 OR P0503: Vehicle speed sensor (VSS)
- DTC P0806-P0808: Clutch pedal position (CPP) Sensor
- DTC P080A: Clutch pedal position (CPP) Not learned
- Clutch pedal position sensor learn
READ NEXT:
DTC P0502 OR P0503: Vehicle speed sensor (VSS)
DIAGNOSTIC CODE INDEX
DTC P0502 OR P0503: VEHICLE SPEED SENSOR (VSS)
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strat
DTC P0806-P0808: Clutch pedal position (CPP) Sensor
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
DTC P080A: Clutch pedal position (CPP) Not learned
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diag
SEE MORE:
Transfer case adapter disassemble (MHB)
Fig. 40: Transfer Case Adapter (MHB)
Transfer Case Adapter Disassemble (MHB)
TRANSFER CASE ADAPTER DISASSEMBLE (M7Y, MZ4)
Fig. 41: Transfer Case Adapter (M7Y, MZ4)
Transfer Case Adapter Disassemble (M7Y, MZ4)
TRANSFER CASE DISASSEMBLE
Transfer Case Holding Fixture Installation
Fig. 42:
Service programming system (SPS)
Special Tools
EL-49642 SPS Programming Support Tool
For equivalent regional tools, refer to Special Tools.
For step-by-step control module programming instructions, please refer to the
techline information system (TIS)
terminal.
Review the information below to ensure proper programming protocol.
N
© 2019-2025 Copyright www.chevtrax.com
