Chevrolet Trax: Air conditioning (a/c) refrigerant pressure sensor replacement
(LUJ, LUV)
Fig. 38: Air Conditioning (A/C) Refrigerant Pressure Sensor
Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement (LUJ, LUV)
AIR CONDITIONING (A/C) REFRIGERANT PRESSURE SENSOR REPLACEMENT (2H0)
Fig. 39: Air Conditioning (A/C) Refrigerant Pressure Sensor (LDE/LUW/LWE)
Air Conditioning (A/C) Refrigerant Pressure Sensor Replacement (2H0)
AIR CONDITIONING EVAPORATOR TEMPERATURE SENSOR REPLACEMENT (5 SENSOR RPO CJ2 LHD)
Fig. 40: Air Conditioning Evaporator Temperature Sensor (5 Sensor RPO CJ2 LHD)
Air Conditioning Evaporator Temperature Sensor Replacement (5 Sensor RPO
CJ2 LHD)
AIR CONDITIONING EVAPORATOR TEMPERATURE SENSOR REPLACEMENT (WITH RPO
C67 LHD)
Fig. 41: Air Conditioning Evaporator Temperature Sensor (With RPO C67 LHD)
Air Conditioning Evaporator Temperature Sensor Replacement (With RPO C67
LHD)
AIR CONDITIONING CONDENSER REPLACEMENT (LUV)
Fig. 42: Air Conditioning Condenser
Air Conditioning Condenser Replacement (LUV)
READ NEXT:
Removal Procedure
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and
Connection .
Recover the refrigerant system. Refer to Refrigerant Recovery and
Rechar
Fig. 49: Heater And Air Conditioning Evaporator And Blower Upper Case
Heater and Air Conditioning Evaporator and Blower Upper Case Replacement
HEATER AND AIR CONDITIONING EVAPORATOR AND BLOWER LOW
Removal Procedure
Drain the cooling system. Refer to Cooling System Draining and Filling .
Remove the air cleaner assembly. Refer to Air Cleaner Assembly
Replacement .
Fig. 58: Rear Hose, Hose
SEE MORE:
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
SCHEMATIC WIRING DIAGRAMS
RADIO/NAVIGATION SYSTEM WIRING SCHEMATICS (ENCORE)
Power, Ground, Serial Data, Antenna, and Audio Input
Fig. 1: Power, Ground, Serial Data, Antenna, and Audio Input
Amplifier Power, Gro
Removal Procedure
WARNING: Refer to Approved Equipment for Collision Repair Warning .
Disable the SIR system. Refer to SIR Disabling and Enabling .
Disconnect the negative battery cable. Refer to Battery Negative Cable
Disconnection and
Connection .
Remove all related panels and components.