Chevrolet Trax: Wheel Alignment System
Chevrolet Trax (2013-2022) Workshop Manual / Suspension & Steering / Wheel Alignment System
READ NEXT:
Wheel Alignment System - Repair instructions
SPECIFICATIONS
WHEEL ALIGNMENT SPECIFICATIONS
Wheel Alignment Specifications
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
REPAIR INSTRUCTIONS
WHEEL ALIGNMENT MEASUREMENT
S
Camber description
Fig. 3: Illustrating Camber Angle
Camber is the tilting of the wheels from the vertical when viewed from the
front of the vehicle. When the
wheels tilt outward at the top, the camber is positive (+
SEE MORE:
DTC B0193: Front blower motor speed circuit
Diagnostic Instructions
Perform the Diagnostic System Check - Vehicle prior to using this
diagnostic procedure.
Review Strategy Based Diagnosis for an overview of the diagnostic
approach.
Diagnostic Procedure Instructions provides an overview of each
diagnostic category.
DTC Descriptors
D
Range selector lever cable adjustment
NOTE: Adjust the automatic transmission range selector cable while
the
transmission and the gear selector are in the Park position only. Failure to
do so may cause mis-adjustment.
Set the park brake and chock the wheels.
Verify the transmission range select lever is in the park position.
Verify
© 2019-2025 Copyright www.chevtrax.com
