Chevrolet Trax: Pairing without Touchscreen
For information about how to
navigate the menu system using the
infotainment controls
Pairing without Touchscreen
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions before
pairing the cell phone. If a Bluetooth
phone is not connected, calls will be
made using OnStar Hands-Free
Calling, if available. See OnStar (if
equipped).
Pairing Information
- A Bluetooth phone with MP3
capability can be paired
separately to the vehicle as a
phone and an MP3 player at the
same time. This requires the
device to be paired two times;
once as a "hands-free" device
and once as an MP3 device.
- Up to five cell phones can be
paired to the Bluetooth system.
- The pairing process is disabled
when the vehicle is moving.
- Pairing only needs to be
completed once, unless the
pairing information on the cell
phone changes or the cell phone
is deleted from the system.
- Only one paired cell phone can
be connected to the Bluetooth
system at a time.
- If multiple paired cell phones are
within range of the system, the
system connects to the first
available paired cell phone in the
order that they were first paired
to the system. To link to a
different paired phone, see
"Linking to a Different Phone"
later in this section.
Pairing a Phone as a Hands-Free
Device
- Press the CONFIG button.
- Select Phone Settings or
Bluetooth Settings.
- Select Bluetooth.
- Select Pair Device
(Hands-Free). A four-digit
Personal Identification Number
(PIN) appears on the display.
The PIN is used is Step 6.
- Start the pairing process on the
cell phone to be paired to the
vehicle. See the cell phone
manufacturer's user guide for
information on this process.
- Locate the device named "Your
Vehicle" in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 4. After the
PIN is successfully entered, the
system prompts you to provide a
name for the paired cell phone.
This name will be used to
indicate which phones are
paired and connected to the
vehicle. The system responds
with "<Phone name> has been
successfully paired" after the
pairing process is complete.
- Repeat Steps 1−6 to pair
additional phones.
Listing All Paired and Connected
Phones
- Press the CONFIG button.
- Select Phone Settings or
Bluetooth Settings.
- Select Bluetooth.
- Select Device List.
Deleting a Paired Phone
- Press the CONFIG button.
- Select Phone Settings or
Bluetooth Settings.
- Select Bluetooth.
- Select Device List.
- Select the phone to delete and
follow the on-screen prompts.
Linking to a Different Phone
To link to a different phone, the new
phone must be in the vehicle and
available to be connected to the
Bluetooth system before the
process is started.
- Press the CONFIG button.
- Select Phone Settings or
Bluetooth Settings.
- Select Bluetooth.
- Select Device List.
- Select the new phone to link to
and follow the on-screen
prompts.
If delete is selected, the
highlighted phone will be
deleted.
READ NEXT:
For cell phones that support the
phone book feature, the Bluetooth
system can use the contacts stored
on your cell phone to make calls.
See your cell phone's owner's guide
or contact your wireless pr
A Bluetooth-enabled cell phone
must be paired to the Bluetooth
system and then connected to the
vehicle before it can be used. See
your cell phone manufacturer's user
guide for Bluetooth functions bef
SEE MORE:
PLEASE READ THIS FIRST *
This article is intended for general information purposes only. This
information may not apply to all makes and
models. If vehicle is equipped with Anti-Lock Brake System (ABS), refer to
appropriate ANTI-LOCK BRAKE
SYSTEM article in the BRAKES section for description, oper
Special Tools
CH-49375 Spanner
For equivalent regional tools, refer to Special Tools .
Removal Procedure
Remove the air inlet grille panel. Refer to Air Inlet Grille Panel
Replacement (Trax) , Air Inlet Grille
Panel Replacement (Encore) .
Fig. 32: Front Suspension Strut Mount Plate Nut Cap