Chevrolet Trax: Immobilizer Operation
Immobilizer
See Radio Frequency Statement
Immobilizer Operation
This vehicle has a passive theft-deterrent system.
The system does not have to be manually armed or disarmed.
The vehicle is automatically immobilized when the key is removed from the ignition.
The system is automatically disarmed when the vehicle is started with the correct key. The key uses a transponder that matches an immobilizer control unit in the vehicle and automatically disarms the system. Only an authorized key starts the vehicle. The vehicle may not start if the key is damaged.
The security light in the
instrument
cluster comes on if there is a
problem with arming or disarming
the theft-deterrent system.
When trying to start the vehicle, the security light comes on briefly when the ignition is turned on.
If the engine does not start and the security light stays on, there is a problem with the system. Turn the ignition off and try again.
If the engine still does not start, and the key appears to be undamaged or the light continues to stay on, try another ignition key. If the engine does not start with the other key, the vehicle needs service. If the vehicle does start, the first key may be damaged. See your dealer who can service the theft-deterrent system and have a new key made.
Do not leave the key or device that disarms or deactivates the theft-deterrent system in the vehicle.
READ NEXT:
Exterior Mirrors
Convex Mirrors
Warning
A convex mirror can make things,
like other vehicles, look farther
away than they really are. If you
cut too sharply into the right lane,
you could hit a vehicle on the
right. C
Interior Mirrors
Interior Rearview Mirrors
Adjust the rearview mirror for a clear
view of the area behind your
vehicle.
If equipped with OnStar, the vehicle
may have three control buttons at
the bottom of the mirror
Windows
Warning
Never leave a child, a helpless
adult, or a pet alone in a vehicle,
especially with the windows
closed in warm or hot weather.
They can be overcome by the
extreme heat and suffer
permanent in
SEE MORE:
Removing the Flat Tire and Installing the Spare Tire
Do a safety check before
proceeding. See If a Tire Goes
Flat
Remove the wheel cover, if the
vehicle has one, to reach the
wheel bolts.
Turn the wheel wrench
counterclockwise to loosen the
wheel nuts. Do not remove
them yet.
Place the jack at the position
marked with a half c
Noise and vibration analysis
A noise or vibration that is noticeable when the vehicle is in motion MAY NOT
be the result of the
transmission.
If noise or vibration is noticeable in PARK and NEUTRAL with the engine at idle,
but is less noticeable as
RPM increases, the vibration may be a result of poor engine performance.
Vi
